Abrasive waterjet cutting services of thick material
One of the greatest advantages of working with Intelligent Cutting Solutions (ICS) is that our state of the art equipment can cut many materials up to 11” thick. Very tight tolerances can be held when cutting anything under 4” thick. Anything over 4” thick is still very accurate but the tolerances will have to be opened up to near net shape.
Edge Quality
Even on thick materials our waterjet cutting services provide the best possible edge quality because the process does not introduce any heat or mechanical stress. There is no heat affected zone (HAZ) and in many cases the edge finish can be used as is without the need for removal or finishing of the edge.
Narrow Kerf
We exclusively use Flow waterjet machines and they are known not only for their accuracy but also for their minimal kerfs. The waterjet stream is so narrow that the resulting kerf is only about .040” This allows for us to maximize your material usage, reduce scrap and save you money.
Main advantages of using abrasive waterjet on thick materials
- Here is no heat affected zone
- There is no thermal distortion
- There are no burrs
- It is a very fast cutting process
- Material up to 11” thick can be cut
- Near net shape is achievable on thick materials.
- Fast programming and easy machine setup
Quotes Within 24 Hours
Remanufacturers of Rotary Screw Compressors
50 Silver St.
Middletown, CT 06457
Phone: 860-346-7421
To email us, use the form here on this page or email [email protected].
How can CMS Airends help you?
If you own a rotary screw compressor and have been faced with the high cost of a factory Airend, you now have a better choice. CMS Airends is one of the largest aftermarket airend rebuilders in the world and has been servicing and rebuilding rotary screw compressor airends since 1977. Our 20,000 square foot facility houses the latest equipment for compressor screw rebuilds. We maintain a complete airend machine shop, fabrication shop, welding shop, and metalizing shop.
Energy costs are rising, and air is a big consumer of energy. If an airend losses efficiency it directly translates into higher energy consumption and thousands of dollars. Your airend is a critical component of your compressed air system.